AmpereTallyWhether 100 amps is enough, worked out the way an inspector does it.

How much does a 100-amp panel upgrade cost in Clovis, NM?

A 100-amp panel upgrade in Clovis, NM
$1,508
a small home with gas heat, gas range and no EV · typical range $1,065 – $2,218
Typical totalinstalled, 100 amp$1,508
Range you should see in bidsthree bids on the same scope normally land inside this$1,065 – $2,218
Labor portion68% of the job — this is the part that moves by city$1,025
Material portion32% — bought at national prices$483
Electricians pay near ClovisBLS does not publish a metro figure for electricians near Clovis, NM, so this is the New Mexico state average, SOC 47-2111$59,620/yr
U.S. mean for the same tradeSOC 47-2111$71,490/yr
Versus the national pricetrade pay here runs −16.6% against the U.S. mean−$192

Notes

  • Where the number comes from. The national price for a 100-amp panel upgrade is $1,700 installed — service panel upgrade pricing published for 2026. Labor is about 68% of that. Electricians near Clovis, NM average $59,620 a year against a U.S. mean of $71,490 — a factor of 0.834 — so the labor half is scaled by that and the material half is not. Source: BLS does not publish a metro figure for electricians near Clovis, NM, so this is the New Mexico state average, SOC 47-2111.
  • This one falls back to a wider average. BLS did not publish a metro-level wage for this trade near Clovis, NM, so the figure above is a state average. It is still the right order of magnitude, but a local bid carries more weight here than it would in a large metro where the survey has more responses.
  • What is in the price: the panel, breakers, a new meter base, grounding electrodes, the service mast, permit inspection time, and labor.
  • What is not: the utility drop, trenching for an underground service, any rewiring inside the house, and repairs to walls the mast passes through. These are the lines that turn a $1,508 quote into a $1,885 invoice, so ask about each one before signing.
  • Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.

a 100-amp panel upgrade in Clovis, NM

$1,508 is the typical number, and three bids on the same scope normally land between $1,065 and $2,218.

That is $192 less than the same job priced at the national average.

Why the city changes the number

About 68% of this job is labor — $1,025 of the $1,508 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.

Electricians near Clovis average $59,620 a year, against a U.S. mean of $71,490. That is a factor of 0.834, so the labor half is scaled by it and the material half is not.

Source: BLS does not publish a metro figure for electricians near Clovis, NM, so this is the New Mexico state average, SOC 47-2111.

What the quote should include

The lines that turn a quote into an invoice

Ask about each of them before you sign. On a job this size they are the difference between $1,508 and something a quarter higher.

Use it as a bid check, not a quote

This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.

If a bid lands outside $1,065 – $2,218, that is not automatically wrong — but it is the question worth asking out loud.

Nearby sizes

Read more