How much does a 200-amp panel upgrade cost in Roswell, NM?
| Typical totalinstalled, 200 amp | $2,484 |
|---|---|
| Range you should see in bidsthree bids on the same scope normally land inside this | $1,597 – $3,548 |
| Labor portion68% of the job — this is the part that moves by city | $1,689 |
| Material portion32% — bought at national prices | $795 |
| Electricians pay near RoswellBLS does not publish a metro figure for electricians near Roswell, NM, so this is the New Mexico state average, SOC 47-2111 | $59,620/yr |
| U.S. mean for the same tradeSOC 47-2111 | $71,490/yr |
| Versus the national pricetrade pay here runs −16.6% against the U.S. mean | −$316 |
Notes
- Where the number comes from. The national price for a 200-amp panel upgrade is $2,800 installed — service panel upgrade pricing published for 2026. Labor is about 68% of that. Electricians near Roswell, NM average $59,620 a year against a U.S. mean of $71,490 — a factor of 0.834 — so the labor half is scaled by that and the material half is not. Source: BLS does not publish a metro figure for electricians near Roswell, NM, so this is the New Mexico state average, SOC 47-2111.
- This one falls back to a wider average. BLS did not publish a metro-level wage for this trade near Roswell, NM, so the figure above is a state average. It is still the right order of magnitude, but a local bid carries more weight here than it would in a large metro where the survey has more responses.
- What is in the price: the panel, breakers, a new meter base, grounding electrodes, the service mast, permit inspection time, and labor.
- What is not: the utility drop, trenching for an underground service, any rewiring inside the house, and repairs to walls the mast passes through. These are the lines that turn a $2,484 quote into a $3,105 invoice, so ask about each one before signing.
- Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.
a 200-amp panel upgrade in Roswell, NM
$2,484 is the typical number, and three bids on the same scope normally land between $1,597 and $3,548.
That is $316 less than the same job priced at the national average.
Why the city changes the number
About 68% of this job is labor — $1,689 of the $2,484 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.
Electricians near Roswell average $59,620 a year, against a U.S. mean of $71,490. That is a factor of 0.834, so the labor half is scaled by it and the material half is not.
Source: BLS does not publish a metro figure for electricians near Roswell, NM, so this is the New Mexico state average, SOC 47-2111.
What the quote should include
The lines that turn a quote into an invoice
Ask about each of them before you sign. On a job this size they are the difference between $2,484 and something a quarter higher.
Use it as a bid check, not a quote
This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.
If a bid lands outside $1,597 – $3,548, that is not automatically wrong — but it is the question worth asking out loud.
Nearby sizes
Read more
- 400 Amp Service Upgrade Cost, and When a House Actually Needs OneMost houses that ask for 400 amps need 200 and a load calculation. The ones that do need 400 pay for two panels, a bigger meter socket and usually a new utility transformer connection.
- What Makes Electrical Work Expensive — Access, Not WireThe same circuit costs three times as much in a finished house as in an open one, and nothing about the circuit is different.
- Rewiring a House: Cost, Signs You Need It, and How the Work Is DoneAccess sets the price. The same square footage costs far more in a plaster house with finished floors above and below than in a ranch with an open basement and attic.
- Knob and Tube, Cloth Wiring and Aluminium — What Old Wiring CostsOld wiring is not automatically dangerous. Old wiring that has been modified by forty years of homeowners usually is.